PRODUCT DESCRIPTION:
UNI-SAFE ph PLUS is a HIGH PERFORMANCE ABSORBENT/BINDER UNIVERSALLY APPLICABLE TO ALL FLUIDS
and to combat all hazardous fluid spill accidents. Its material composition will not cause any hazardous reaction (even with strongly reacting and oxidizing substances, such as nitric acid, hydrofluoric acid, and chlorsulfonic spills) 
 - Universality eliminates having to find spill-specific cleanup product.

 - Absorbs all liquid spills, Oil & Chemical. Leaves surface smear free and reduces contamination. 

 - Acts as an emission blocker creating a 'fume barrier' protecting personnel and environment 

 - Gels the spill immediately for easy cleanup. Safe to use - non-flammable, non-toxic, no dangerous reactions.

SPECIAL FEATURE...... Wideband Colour Indicator



The above chart supplied on each Uni-Safe ph Plus container, shows the indicator range of pH 1 to pH13 which assists with the identification of the type of chemical spilt or to be controlled. Immediate result once Uni-Safe contacts the fluid.
 

Features:

• Binds all liquids into a non flowing gel
• High absorbent capacity
• Acts as a fume/emission barrier – suppresses vapours
• Changes COLOUR to indicate pH range
• No hazardous reactions with chemicals
• Non Combustible – Non Toxic – Not Dangerous Goods
• An essential item for all Hazardous Materials Response Teams
• The best and easiest way to identify a hazardous chemical 

Also Available.....
UNI-SAFE ph PLUS  - Spray Applicator
Assists Hazmat & Response Teams to identify chemicals -
 - Easily • Turn them into a gel
 - Safely • Block emissions & vapors
 - From a distance using the Uni-Safe Spray Jet

PRODUCT APPLICATION:
Apply around the edge of the spill fluid and sweep over immediately with a broom. Check for colour indicator change to assist with chemical identification.
Spray the Uni-Safe Binder around the perimeter of the fluid working towards the centre to completely cover the spill.

PRODUCT DESCRIPTION:
Prenco offers a better way to deal with Acid spills....

Absorb AND Neutralise the spill for a more effective and safer response

Safety Note: Please advise Prenco on the type of Acid being used prior to ordering, so we can advise on the best type of solution for the situation 
 
ACIDSORB - Econo for LOW CONCENTRATION Acids below 50% (e.g. battery acid) 

Acid-Sorb is supplied in a 5 kg bag or 5 litre jug and has been designed to contain, absorb and neutralize acid spills.

It can be used on various types of low concentration acid spills such as Battery Acid. (check first with Prenco as to any restrictions) Acid-Sorb is effective in absorbing the acid spill which then reduces the emission of toxic fumes. Acid-Sorb contains neutralizing agents that will partially, or in many cases, totally neutralize the acid, making it much safer to handle and dispose.

PRODUCT APPLICATION:
Apply around the edge of the spill fluid and sweep over immediately with a broom. Spill mixture will "fizz" for a period as partial neutralisation takes place. Check pH and add more absorbent or spray with water until completely neutral. Full ACIDSORB instructions for use and MSDS supplied with each order.

PRODUCT DESCRIPTION:
LSL ACID NEUTRALISER is a unique blend of Na2 Co3 and  all  purpose super polymer absorbent which instantly neutralizes and absorbs most acids ( Not for use with hydrofluoric acid. For hydrofluoric try our Uni-Safe Binder)

ACID SPILLS
Acid spills are hazardous due to their corrosive effects to eyes, skin and mucous membranes. Prolonged exposure can cause life threatening injury. When acids combine with other chemicals the reaction products can be highly toxic.
Liquid Spill Lock Acid Neutraliser reacts immediately with spilled acids to effectively neutralise and immobilise the liquid for safe handling and disposal.

LSL Acid Neutraliser is a fast acting, flowable, powder formulated to safely neutralise and solidify spills of most common acids. It reduces the potential hazard by providing safe and effective handling after neutralisation, resulting in complete non-hazardous clean-up and easy disposal. Liquid Spill Lock has its own built in colour indicator to show the neutralising process as the acid turns from a light purple to a dark purple at full neutralisation.
Suitable for disposal in landfills when total neutral ph is obtained.

Features

• Ideal solution for small volume acid spills
• Safely deal with spilled aggressive liquids by neutralising and solidifying, instead of just absorbing
• pH indicator. The solidified reaction products will be primarily LIGHT PURPLE in the foaming neutralisation and then DARK PURPLE when neutralisation takes place and the spill turns into a granular gel.
• Immediately stops the spread of corrosive acids
• Can help stop acid spills before they migrate under valuable equipment or run down drains
• Single process for making spilled acids non-hazardous, easy to clean-up and safe for disposal
• Reduces hazardous vapours and fumes
• Minimises waste for disposal. Produces a non-hazardous clean, dry powder that can be swept-up.

PRODUCT APPLICATION:
Battery Shops/Manufacturers, Manufacturing Facilities, Chemical Companies, Storage Warehouse, Transport and Shipping, Schools, Universities, Research Units, Laboratories, Pharmacies and Clinics, Hospitals and Medical Labs, First Aid Sites, Emergency Response Units (Police, Fire Departments, Ambulance Officers and other Hazmat responders), Printed Circuit Board Manufacturers, Motor Garages, Vehicle Wrecking Yards, Anodizing and Plating Plants.


 

PRODUCT DESCRIPTION:
Prenco offers a better way to deal with Caustic spills....

Absorb AND Neutralise the spill for a more effective and safer response

Safety Note: Please advise Prenco on the type of Caustic being used prior to ordering, so we can advise on the best type of solution for the situation

CAUSTICSORB - Econo for LOW CONCENTRATION Caustics below 50%

Caustic-Sorb is supplied in a 5 kg bag or 5 litre jug and has been designed to contain, absorb and neutralize caustic(bases) spills.

It can be used on various types of low concentration caustic spills such as Sodium Hydroxide. (check first with Prenco as to any restrictions) Caustic-Sorb is effective in absorbing the caustic spill which then reduces the emission of toxic fumes. Caustic-Sorb contains neutralizing agents that will partially, or in many cases, totally neutralize thecaustic, making it much safer to handle and dispose.

PRODUCT APPLICATION:
Apply around the edge of the spill fluid and sweep over immediately with a broom. Spill mixture will "fizz" for a period as partial neutralisation takes place. Check pH and add more absorbent or spray with water until completely neutral. Full CAUSTICSORB instructions for use and MSDS supplied with each order.

PRODUCT DESCRIPTION:
LSL BASE NEUTRALISER is a unique blend of Citric Acid &  all  purpose super polymer absorbent which instantly neutralizes and absorbs most bases ( refer to MSDS sheet below for Incompatibles)

CAUSTIC SPILLS
Most caustics are corrosive to organic tissues and can result in severe skin and eye irritation or burns from direct contact. Caustic vapours may be corrosive to the respiratory system. Prolonged exposure can cause life threatening injury. Alkalis can inflict irreversible damage to eyes if eye contact occurs. When caustics combine with other chemicals the reaction products can be highly toxic. LSL reacts with spilled alkaline solutions to effectively neutralise and solidify (for most alkalis) the liquid for safe handling and disposal.

LSL Base Neutraliser is a fast acting, flowable, powder formulated to safely neutralise and solidify spills of most common bases. It reduces the potential hazard by providing safe and effective handling after neutralisation, resulting in complete non-hazardous clean-up and easy disposal. Liquid Spill Lock has its own built in colour indicator to show the neutralising process as the base turns from a light orange to a bright orange at full neutralisation.
Suitable for disposal in landfills when total neutral ph is obtained.

Features

• Ideal solution for small volume acid spills
• Safely deal with spilled aggressive liquids by neutralising and solidifying, instead of just absorbing
• pH indicator. The solidified reaction products will be primarily LIGHT ORANGE in the foaming neutralisation and then DARK ORANGE when neutralisation takes place and the spill turns into a granular gel.
• Immediately stops the spread of corrosive acids
• Can help stop acid spills before they migrate under valuable equipment or run down drains
• Single process for making spilled acids non-hazardous, easy to clean-up and safe for disposal
• Reduces hazardous vapours and fumes
• Minimises waste for disposal. Produces a non-hazardous clean, dry powder that can be swept-up.

PRODUCT APPLICATION:
Battery Shops/Manufacturers, Manufacturing Facilities, Chemical Companies, Storage Warehouse, Transport and Shipping, Schools, Universities, Research Units, Laboratories, Pharmacies and Clinics, Hospitals and Medical Labs, First Aid Sites, Emergency Response Units (Police, Fire Departments, Ambulance Officers and other Hazmat responders), Printed Circuit Board Manufacturers, Motor Garages, Vehicle Wrecking Yards, Anodizing and Plating Plants.
 

PRODUCT DESCRIPTION:
Mercsorb Amalgamation powder* was developed to make cleaning mercury spills from work surfaces, floor cracks and other hard to reach areas easier and safer. This is accomplished through converting the elemental mercury into an amalgam, which ceases the emission of dangerous mercury vapours from being emitted.

Note: Only trained personnel should respond
to mercury spills. Mercury is toxic and hazardous. Extreme caution should be exercised when handling, storing or disposing  of the used Mercsorb & kit components.

*Available in our Mercury Spill Kit with clean up accessories and Indicator powder

PRODUCT APPLICATION:
Mercsorb Spill Control Products are a full line of individual products and kits that are ideal when responding to mercury spills in the work environment. Applications and Industries that would benefit from these products, are battery production, mining & manufacturing facilities, hospitals, laboratories, schools,  dental offices, and electricity suppliers.

PRODUCT DESCRIPTION:
LIQUID SPILL LOCK BIOHAZARD 
LSL BioHazard Solidifyer - Absorbs 300 times its own weight in seconds
Spill is turned into a scoop-able gel, leaving surface dry and clean

A super absorbent polymer that contains a disinfectant bleach which kills germs making it suitable for potentially infectious human and animal spills.
Added to the mix is also a lemon aroma which gives the Liquid Spill Lock a crisp/fresh smell.
Unlike traditional absorbents like cat litter and organic materials, Liquid Spill Lock Biohazard Solidifier is safe to use around humans, animals, equipment and can be used on all floor surfaces
 

Product Features

• Economical – very large absorption capacity- only small amounts need to be applied
• Ideal solution for small volume spills – simply pour onto spill to turn fluid into a gel
• Minimises potentially dangerous risks to personnel and the environment
• Effectively neutralises, disinfects, solidifies and immobilises biohazard fluids
• Immediately stops the spread of the fluids before they migrate into other areas
• Reduces noxious vapours and fumes
• Minimises damage to surfaces under and around the spill
• Safe to use and store. Indefinite shelf life if container kept sealed

USE LIQUID SPILL LOCK BIOHAZARD SOLIDIFIER WHERE EVER THERE IS A RISK OF SPILLS:
Automobiles - Day Care Centres - Restaurants - Buses - Taxis - Hospitals - Schools - Cruise Ships - Nursing Homes - Schools - Doctors Surgery - Veterinary Clinics

PRODUCT DESCRIPTION:
Poly Hazchem Mini Booms are capable of absorbing and containing virtually any fluid safely and effectively,
including acids and caustics. Stops liquids from spreading, keeping work areas dry and safe.
Perfect for use around the base of upright stored containers. 
Polypropylene filled with a chemically-inert polypropylene covering.

Australian Made

• 1.2m & 3m sizes
• Absorbs most chemicals - approx capacity of 1-4 litres
• Yellow poly with chemically inert covering

PRODUCT APPLICATION:
Place BOOMS around the perimeter of the spill to help prevent spread.
Assists in control/diverting a spill and protecting entry of fluid into drains.
Perfect for use around the base of machinery & upright stored containers

PRODUCT DESCRIPTION:
Hazchem Absorbent Pillows are especially treated to absorb hazardous fluids- acids; caustics; solvents;
petroleum based liquids, insecticides and also non-aggressive fluids.
They have a high absorption rate, making them highly effective for any hazardous chemical clean-up application.
Made of low-lint needle-punched polypropylene.
 

Australian Made

• Small and Large sizes
• Easy to deploy – quick to sorb.
• Yellow poly construction for ease of identification

PRODUCT APPLICATION:
Place PILLOWS under leaks and drips to absorb fluid. Also useful for blocking entry of fluid into drains.
 

PRODUCT DESCRIPTION:
400gsm 43cm x 48cm Hazchem Absorbents Pad absorb acids; caustics; solvents; petroleum based liquids and water.
They have a high absorption rate, making them highly effective for any hazardous chemical clean-up application.
Haz-chem absorbents pads are ideal for hospital and Industrial labs.
Made of low-lint needle-punched polypropylene and are the toughest pads available.
These pads will not fall apart and let you down when handling dangerous chemical spills.

Australian Made

• Super Strong Needlepunched Polypropylene
• Can be rung out and reused many times - absorbs approx 1 litre
• Yellow colour for ease of identification 

PRODUCT APPLICATION:
PADS & ROLLS are used to place on spills to absorb fluids.
Large surface area/Covers surface spills and catches drips on land or factory floors
and can be slid under difficult to reach areas to absorb.
Strongest on the market - Will not tear under extreme industrial use.

PRODUCT DESCRIPTION:
POLY AUSSIE HAZCHEM YELLOW Absorbent ROLLS are ideal for those chemical  clean-up jobs.
400gsm 96cm Wide x 43m Long HEAVY DUTY Chemical Absorbent Roll absorbs, Chemicals & all General fluids
without degrading or reacting.

Available in perforated version so that sections can be torn off as needed or non-perforated for longer lengths.
Use as a walk on mat, or tear along the perforated lines to get the right length for
use as a pad or square around and under chemical storage containers.
Ideal for use as an absorbent on lab work benches

• Super Strong Needlepunched Polypropylene
• Perforated or Non-Perforated - tear off only what is needed
• Yellow colour for ease of identification

PRODUCT APPLICATION:
PADS & ROLLS are used to place on spills to absorb fluids. Large surface area/Covers surface spills and catches drips on land or factory floors and can be slid under difficult to reach areas to absorb. Strongest on the market - Will not tear under extreme industrial use.