P/N: SP-1

Spill Pallets - 4 Drum Spill Pallet

Spill Pallets - 4 Drum Spill Pallet

PRODUCT CODE: SP-1

PRODUCT DESCRIPTION:

4 DRUM POLY SPILL PALLETS - A polyethylene sump with deck surface large enough to store four 205 litre drums. In the event of a leak, fluid is contained in the sump preventing contamination to surrounding environment.

The Ultra-SpillPallet 4 Drum, Nestable Model helps you comply with containment regulations while storing steel and poly drums. Capture leaks, drips and spills to keep floors dry and workers safe. 

S        2,722kg. UDL capacity is strong enough to support four fully loaded steel or poly drums

S        Molded-in sump catches leaks, drips and spills to help you comply with regulations and keep your storage areas clean and safe

S        Low 254mm height means loading and unloading require less effort and drum tops are within easier reach

S        Compact footprint reduces floor area needed for drum storage

S        Low-density polyethylene (LDPE) construction resists UV rays, rust, corrosion and most chemicals for long, trouble-free life

S        Removable textured grating enhances traction to minimize costly slips and to help prevent drums from sliding; lifts out to provide unrestricted sump access for hasslefree cleaning

S        Optional drain plug lets you conveniently empty sump without removing drums or grating

S        2-way forklift entry allows easy movement from either direction(unloaded only)

S        Nestable design permits stacking when not in use to save space; lowers cost of bulk shipping             

Features

Dimensions: 1295mmL x 1295mmW x 254mmH

Weight: 36kg

Sump Capacity: 250 litres

Uniformly Distributed Load Capacity (UDL): 2,722kg

This product helps you comply with:

Regulatory Citation Summary

40 CFR 112.7 SPCC planning requirements state that facilities subject to these regulations must have written plans in place discussing the products, countermeasures and procedures that are in place, or will be taken by the facility to prevent discharge of oil into waters. 

40 CFR 264.175 Hazardous waste containment systems must be free of structural cracks or gaps, be designed to keep spilled liquids from remaining in contact with the container, prevent run-on and "have sufficient capacity to contain 20% of the volume of the containers, or the volume of the largest container, whichever is greater."

Disclaimers - Flammables Notice: If using this product with flammable liquids, please consider the regulations that apply to storage and handling of flammable liquids and the safety of this application, specifically flammable vapors, static discharge and heat sources. 

PRODUCT APPLICATION: 

Use for storage of up to 4 x 205 litre drums or when decanting fluids. For storage of both steel and polyethylene drums and smaller containers which need to meet containment regulations and/or for general housekeeping purposes.

Terms & Conditions | Privacy Policy